Flange Model
45DF / 60DF / 70DF / 80DF / 110DF / 140DF / 180DF / 250DF
This type, we have researched and developed for a long time which has high rigidity and various connections to tables, gears, sprockets and the other peripherals placed onto the output shaft face where in the center a hollow is provided to enable the connection with a foreign shaft as well.
In addition, the well-designed housings of this ensure an easy handling installation.
Ever sensitive to the users’ needs, we can assure that our index drives will satisfy those engaged in the assembly work.
Shaft Model
25DS/32DS/38DS/45DS/60DS/70DS/80DS
83DS/100DS/110DS/140DS/180DS
TAN TZU Index Drives are classified into the following three types with the configurations of the output portions: Shaft, flange and table models.
This is one of our conventional products. We provide it with a selection of either straight or tapered shafts. It is easy to use and install.
Sway Model
45DH / 70DH / 80DH / 100DH
The oscillating, up and down gripping system contributes to close tight, high precision, and high-speed grasp convey, which in automation system provides a variety of multi-process capabilities. The H series designed as the synthesis mechanism for output shaft offers reciprocating motion, intermittent rotation, or rocking movement.
Table Model
80DT / 110DT / 140DT / 180DT / 210DT / 250DT
This is one of the fully-developed table type index drives, which has high rigidity because of the adoption of a wider and lower table in whose center a tough hollow shaft is employed. This housing is so designed than an attachment can be installed on its sides, therefore, it is most suitable to rotary automatic assemblers, transfer machines and automatic wrappers.
Ultrathin Table Model
70DA / 90DA / 110DA / 150DA / 190DA / 230DA
The properties of the series are the same as the table model. It could be endured the heavy axial and radial load. The neces-sary equipment would be assembled directly to the flange and large diameter hollow shaft of the output of the series. Electric wire and pipe from the power source could be passed through the hollow shaft. The series are widely applied in automation apparatus and industrial machinery to work the intermittent motion.
Paradex Model
PU50DS / PU60DS / PU65DS / PU80DS
PU100DS / PU125DS / PU150DS / PU175DS
PU225DS / PU250DS / PU320DS / PU400DS
It consists of 2 plate cams fixed to the input shaft and a spider that supports the cam follower to the output shaft. This indexing drive has a plane cam mechanism designed so that the follower contacting the 2 plate cams on the input side serves to transmit rotation to the spider of the output shaft. Best suited for driving conveyors moving at large feed pitches or for intermittent indexing that stops at comparatively long intervals. The another is 3 plate cams designed as heavy load type. It more suits for conveyor rapid moving, stop at more long intervals and larger feed pitches.
